CUSTOM LABEL BUYER DATA
Specify once.
Avoid costly label rework.
A practical specification reference for vial, supplement and holographic label orders. Compare the inputs that affect fit, application, artwork and your quote.
ORDER PLANNING AT A GLANCE
What is the minimum order for custom labels?
RP Labels custom label orders start from 100 pieces, subject to confirmation for each design and specification. A combined total across several SKUs does not establish the minimum for each version. Free artwork support and a digital proof are available. Typical sample preparation is 1–2 days after project and artwork confirmation; typical bulk production is 10–12 days after final artwork approval and project confirmation. Shipping time is additional. Confirm the sample type, any sample costs and destination delivery in your project quote.
Ordering guidance reviewed October 22, 2026 · Prepared by RP Labels. These are planning terms, not a project-specific quotation or a material test report. Your agreed specification, approved artwork and any required physical review define the order. Sample arrangements and shipping are confirmed separately.
Label size calculator · Guides by purchasing question · Request a custom quote
20 SPECIFICATION CHECKS
Which specifications are needed for a label quote?
| Specification | Current guidance | Your next decision |
|---|---|---|
| Product ranges | Peptide vial, supplement bottle/jar and holographic labels | Select the package and desired function. |
| Design references | 48 examples across 3 ranges; 16 per range | References are customizable designs, not stocked products. |
| Starting quantity | From 100 pieces, subject to specification | Confirm the minimum and quantity for EACH artwork version. |
| Design support | Free artwork support and a digital proof | Provide your logo, approved wording and required layout. |
| Sample preparation | Typically 1–2 days after project and artwork confirmation | Confirm the sample type and schedule in your quote. |
| Bulk production | Typically 10–12 days after artwork approval and project confirmation | Shipping time is separate; confirm your required delivery date. |
| Dimensions | Custom width × height; record units in mm or inches | Measure the actual container, not only its capacity. |
| Container geometry | Diameter or measured circumference plus usable height | Use the calculator for straight-sided circular packages. |
| Seam allowance | Gap or overlap amount, in the same unit as the dimensions | Check whether the seam hides text or interferes with application. |
| Edge clearance | Top and bottom clearance, each recorded separately if different | Keep the label off shoulders, curves and the base. |
| Surface | Glass, plastic or another specified surface | Send the surface type, texture and intended application conditions. |
| Exposure | Moisture, rubbing, storage and application temperature | Specify real conditions and agree a sample test. |
| Material & adhesive | Chosen for the surface and exposure; confirmed per project | A material name alone does not establish adhesion or durability. |
| Finish | Matte, gloss or holographic appearance as agreed | Evaluate the sample for visual effect, text and code readability. |
| Supply format | Rolls or sheets | For machine rolls, send core, outer diameter, unwind and gap requirements. |
| Artwork control | One filename and approved revision per SKU | Confirm quantities, colors, wording and changes for every design. |
| Codes & variable data | Customer-supplied destination, numbering rules or data | Check data accuracy and scan readability before approval. |
| Material documents | Availability and scope confirmed for the chosen construction | Tell us the required declaration or report before ordering. |
| Pricing inputs | Size, material, finish, artwork versions, quantity and destination | Request a project quote; no universal unit-price table applies. |
| Repeat orders | Approved artwork revision and construction reference | List all changes so that a new version is not mistaken for a repeat. |
What does each approval actually confirm?
Approve the evidence for the decision in front of you. Accepting a layout does not settle how a finished label will look, stick or feed through a machine. Keep open questions visible rather than recording a single unqualified “sample approved.”
| Review | What to record | What remains to confirm |
|---|---|---|
| Digital artwork proof | Exact filename and revision, wording, cut size, artwork layers and SKU data. | Printed appearance, adhesion and machine compatibility are not established by a screen preview. |
| Physical sample | Identify the container, construction, artwork and finish actually represented; note substitutions. | Accept only the appearance, fit or handling questions the agreed sample review addresses. |
| Machine-application trial, where needed | Have the packer review the proposed roll, liner, orientation and equipment inputs. | A few loose labels do not demonstrate that a production roll will feed as required. |
| Production release | Link the agreed quote and specification to the final artwork, quantity per design, approver and release date. | Resolve outstanding requirements or explicitly agree their treatment before authorizing production. |
If you are still choosing artwork, a representative material swatch may help narrow the options without proving your final printed color. If an established design is changing construction, the unchanged PDF cannot settle that change: identify what the physical comparison must represent. Neither situation automatically calls for the most elaborate sample program.
Use the sample selection guide to define the evidence you need, then the proof approval checklist to release the correct artwork version. Keep both decisions with the same project reference.
CHOOSE THE RIGHT STARTING POINT
Different packaging creates different risks.
VIALS
Fit the small curved surface
Measure circumference and usable height. Keep the seam away from critical text. Vial label requirements
BOTTLES & JARS
Plan the information panels
Allocate space for your approved wording and codes before choosing the dieline. Supplement label requirements
HOLOGRAPHIC
Separate appearance from function
Specify optical effect, removal evidence and code verification as separate requirements. Holographic label requirements
WHEN THE STANDARD APPROACH IS NOT ENOUGH
Check these cases before approving a label.
- Tapered, oval or irregular packaging: send a drawing or sample; a cylinder formula does not define the correct dieline.
- Cold, wet or textured surfaces: test the agreed adhesive and full construction on the actual package.
- Machine-applied rolls: verify the applicator requirements before the roll layout is confirmed.
- Authentication projects: define a verification workflow; an optical effect or ordinary QR code alone does not authenticate a product.
No blanket certification claim is made here. Request the exact material documentation needed and confirm its availability, scope and relevance to the supplied construction.
BEFORE YOU SEND YOUR BRIEF
Answers to the questions that slow down orders.
Is the 100-piece starting quantity shared across every design?
Do not assume a combined total meets each design’s minimum. List the quantity for each artwork version and confirm the applicable minimum in the quote.
Can I use a competitor’s label size?
Use it only as a reference. Containers with the same nominal capacity can differ in circumference and usable height. Measure and test the actual package.
Can you give a fixed price from the calculator?
The calculator estimates geometry only. Construction, finish, artwork versions, quantity and delivery affect the quote.
What confirms that a label is ready for production?
Confirm the final dimensions, artwork revision, material, adhesive, supply format, quantities and acceptance checks. Approve the digital proof and any required sample before bulk production.
GET A PROJECT-SPECIFIC QUOTE
Send a brief that is ready for a useful quote.
Send your container dimensions, artwork or logo, quantity per design and delivery country. We will help define the specification.
