LABEL SIZE CALCULATOR

Measure your container.
Calculate your starting label size.

Convert diameter or circumference into a wraparound width. Add your seam choice and edge clearances, then take the result straight to your custom quote.

YOUR CONTAINER, YOUR DIMENSIONS

All dimensions use the selected unit. Changing units converts values already entered. Use measured dimensions; the examples are not recommended label sizes.

YOUR STARTING DIELINE

Width × Height

Enter your container measurements to calculate a starting size.

A sizing estimate for straight-sided circular containers. Check a paper mock-up, artwork and an adhesive sample before production.

HOW THE SIZING WORKS

Simple formulas. A physical fit check.

Input or resultFormula / unitWhat it means
Circumference CC = π × outside diameter DUse the measured circumference directly if you have it.
Width with a gapW = C − gapA gap leaves an uncovered seam between the two label edges.
Width with overlapW = C + overlapThe trailing edge overlaps the first edge. Confirm adhesive suitability for that seam.
Label heightH = usable height − 2 × edge clearanceThis tool uses the SAME clearance at top and bottom.
Unit conversion1 inch = 25.4 mmThe result shows both millimeters and inches; values are rounded to 3 decimals.

For example only: a 20 mm outside diameter, 30 mm usable height, 2 mm gap and 1 mm clearance at each edge give an approximate label size of 60.832 × 28 mm. These values illustrate the calculation; they are not a recommended specification.

Quantity is included in the inquiry brief. It does not affect the geometry and does not create a price quote.

BEFORE YOU PRINT

A calculated size is the beginning of approval.

01 / FIT

Wrap a paper mock-up

Check the seam and the top and bottom edges on the actual container. A paper mock-up checks fit, not adhesive performance.

02 / READ

Check the artwork

Confirm text, codes, logo placement and the exact revision at the proposed size.

03 / APPLY

Test the construction

Review an adhesive sample under the agreed application, storage and handling conditions.

For tapered, oval, flexible or irregular packages, send a drawing or physical sample. This calculator assumes a straight-sided circular container and does not calculate a shaped dieline.

Reviewed October 6, 2026 · Prepared by RP Labels. Basis: our current ordering guidance and packaging specification workflow. Dimensions and examples are planning inputs; your approved quote, proof and sample confirm the order.

Label size calculator · Custom label specifications · Request a custom quote

GET A PROJECT-SPECIFIC QUOTE

Need help choosing the material for this size?

Send your container dimensions, artwork or logo, quantity per design and delivery country. We will help define the specification.

FREE DESIGN TOOL

See your brand on a label before you order.

Choose from 12 original templates, add your logo and label wording, preview the wrap, and download your design. No account required.