LABEL SIZE CALCULATOR
Measure your container.
Calculate your starting label size.
Convert diameter or circumference into a wraparound width. Add your seam choice and edge clearances, then take the result straight to your custom quote.
YOUR STARTING DIELINE
Width × Height
Enter your container measurements to calculate a starting size.
A sizing estimate for straight-sided circular containers. Check a paper mock-up, artwork and an adhesive sample before production.
HOW THE SIZING WORKS
Simple formulas. A physical fit check.
| Input or result | Formula / unit | What it means |
|---|---|---|
| Circumference C | C = π × outside diameter D | Use the measured circumference directly if you have it. |
| Width with a gap | W = C − gap | A gap leaves an uncovered seam between the two label edges. |
| Width with overlap | W = C + overlap | The trailing edge overlaps the first edge. Confirm adhesive suitability for that seam. |
| Label height | H = usable height − 2 × edge clearance | This tool uses the SAME clearance at top and bottom. |
| Unit conversion | 1 inch = 25.4 mm | The result shows both millimeters and inches; values are rounded to 3 decimals. |
For example only: a 20 mm outside diameter, 30 mm usable height, 2 mm gap and 1 mm clearance at each edge give an approximate label size of 60.832 × 28 mm. These values illustrate the calculation; they are not a recommended specification.
Quantity is included in the inquiry brief. It does not affect the geometry and does not create a price quote.
BEFORE YOU PRINT
A calculated size is the beginning of approval.
01 / FIT
Wrap a paper mock-up
Check the seam and the top and bottom edges on the actual container. A paper mock-up checks fit, not adhesive performance.
02 / READ
Check the artwork
Confirm text, codes, logo placement and the exact revision at the proposed size.
03 / APPLY
Test the construction
Review an adhesive sample under the agreed application, storage and handling conditions.
For tapered, oval, flexible or irregular packages, send a drawing or physical sample. This calculator assumes a straight-sided circular container and does not calculate a shaped dieline.
Reviewed October 6, 2026 · Prepared by RP Labels. Basis: our current ordering guidance and packaging specification workflow. Dimensions and examples are planning inputs; your approved quote, proof and sample confirm the order.
Label size calculator · Custom label specifications · Request a custom quote
GET A PROJECT-SPECIFIC QUOTE
Need help choosing the material for this size?
Send your container dimensions, artwork or logo, quantity per design and delivery country. We will help define the specification.
FREE DESIGN TOOL
See your brand on a label before you order.
Choose from 12 original templates, add your logo and label wording, preview the wrap, and download your design. No account required.
